When the conveyor belt deviates from the track, how should we adjust it? The phenomenon of conveyor belt deviating from the track (deviation) during operation is a common problem in many production sites. Deviation not only affects the normal operation of the equipment, but also may cause damage to the conveyor belt and even bring safety hazards. In this case, timely and effective adjustment is particularly critical. Below, we will introduce several effective correction methods in detail to help you quickly locate the cause and make precise adjustments.
How should the conveyor belt deviation be corrected?-
First, we need to check whether the transverse center line of the roller is aligned with the longitudinal center line of the conveyor. If the deviation exceeds 3mm, it can be corrected by adjusting the elongated mounting holes on both sides of the roller group. Specifically, which side the conveyor belt deviates to, move the roller group on that side in the direction of the conveyor belt forward, or move the other side backward.
Secondly, check whether the two planes of the head and tail frame mounting bearing seats are on the same plane and whether the deviation exceeds 1mm. If necessary, the two planes should be adjusted to ensure that they are in the same plane. For the adjustment of the head roller, if the conveyor belt deviates to the right side of the roller, the bearing seat on the right side of the roller should be moved forward or the bearing seat on the left side should be moved backward; vice versa. The adjustment method of the tail roller is opposite to that of the head roller.
In addition, pay attention to the position of the material on the conveyor belt. If the material is not placed in the center, it may also cause the conveyor belt to deviate. To avoid this, you can try to center the material during use, or add a baffle to change the direction and position of the material.
The installation of the machine needs to be very precise, because any small error may cause the equipment to not operate normally, which will have a significant impact on our work. Therefore, when you encounter the problem of conveyor belt deviation, you can deal with it according to the above method, and I believe that your problem can be solved quickly.
