QXG250 Spring Safety Clutch Drive Unit

QXG250 Spring Safety Clutch Drive Unit

The QXG250 spring-loaded safety clutch drive unit integrates an electromagnetic speed-regulating motor, reducer, caterpillar drive mechanism, and adjustable overload-protection clutch into one assembly. Designed for 250 mm pitch QXG enclosed-track conveyor chains in powder coating, painting, and finishing lines.
Send Inquiry
Product Introduction

Hangzhou Ocean Industry Co., Ltd. is one of the most experienced manufacturers and suppliers of qxg250 spring safety clutch drive unit in China. Welcome to wholesale customized qxg250 spring safety clutch drive unit at competitive price from our factory. Good service and quality products are available.

 

QXG250 Spring Safety Clutch Drive Unit – Overload-Protected Caterpillar Drive Head for Enclosed-Track Overhead Conveyor Systems

 

Every overhead conveyor system depends on one component to transform electrical power into controlled linear chain motion: the drive unit. The QXG250 spring safety clutch drive unit - also referred to as the overload-protected drive head - serves as that critical power-conversion stage, engineered specifically for 250 mm pitch QXG-class enclosed-track overhead conveyor chains. Unlike generic motor-gearbox combinations that expose the chain loop to unmitigated torque spikes, the QXG250 drive unit integrates a calibrated spring-loaded safety clutch that functions as a mechanical circuit breaker: it instantly disengages the motor from the caterpillar drive train the moment traction force exceeds the preset overload threshold.

The drive unit's operational sequence is elegantly straightforward. An electromagnetic speed-regulating (slip-clutch) motor delivers variable-speed input to a worm or helical reducer, which steps down RPM while multiplying torque. The reducer output shaft turns the drive sprocket, which engages a caterpillar-style drive chain fitted with hardened pusher dogs. These dogs, spaced at intervals matching the 250 mm chain pitch, drive against the conveyor chain's cruciform joint blocks, translating rotary torque into smooth linear chain propulsion at operator-selected speeds typically ranging from 0.5 to 15 m/min. This caterpillar-drive architecture distributes the driving force across multiple engagement points rather than concentrating it at a single sprocket tooth interface, substantially reducing peak contact stress and extending both chain and drive component life.

What distinguishes the QXG250 drive head from conventional conveyor drive assemblies is the spring safety clutch positioned between the reducer output and the drive sprocket. When the conveyor chain encounters a jam - from a snagged carrier, a seized wheel bearing, a workpiece fallen across the track, or debris lodged in a curve section - the resulting traction-force spike exceeds the clutch's pre-calibrated spring force. Within milliseconds, the clutch face-gear teeth disengage, the drive head frame pivots counterclockwise against a limit switch, and the motor immediately stops. No chain links break. No sprocket teeth shear. No reducer gear teeth strip. The entire line halts before mechanical damage propagates. After the obstruction is cleared, the drive head frame returns under spring tension to its operating position, the clutch face-gear teeth automatically re-mesh, and the line resumes operation without requiring recalibration, re-timing, or component replacement. This single mechanical safeguard separates a routine jam clearance from a multi-day shutdown requiring replacement chain links, drive sprockets, and potentially a new reducer.

 

Safety Clutch Overload Protection Mechanism - How It Works

Spring-Loaded Face-Gear Engagement

At the heart of the safety clutch is a pair of mating face gears- sometimes described as dog-clutch or jaw-clutch faces - pressed together by a calibrated helical compression spring. Under normal operating loads, the spring force keeps the face-gear teeth fully engaged, transmitting reducer output torque directly to the drive sprocket and onward to the caterpillar drive chain. The spring pre-load is factory-set to approximately 100% of the chain's rated allowable tensile force, meaning the clutch will transmit normal working loads without any tooth separation or micro-slippage.

Overload Trip Sequence (Step by Step)

Obstruction detection. A physical blockage in the conveyor circuit (jammed carrier, seized wheel, foreign object) causes the chain traction force to spike above the clutch's pre-set trip threshold. This spike propagates backward through the chain loop and caterpillar drive chain to the drive sprocket.

Clutch disengagement. The excessive torque overcomes the spring clamping force, forcing the face-gear teeth apart axially. The driven half of the clutch (connected to the drive sprocket) decouples from the driving half (connected to the reducer output shaft). This disengagement occurs within 5–10 milliseconds of the overload event.

Drive head frame rotation. The sudden torque release causes the pivoting drive head frame to rotate counterclockwise (typically 10–15 degrees). This movement is a deliberate mechanical design feature - the frame is not rigidly bolted but pivots on a bearing journal specifically to enable this trip motion.

Limit switch activation. As the drive head frame rotates, it depresses a mechanical limit switch mounted on the stationary base plate. This switch opens the motor control circuit, cutting power to the electromagnetic speed-regulating motor. Motor rotation stops within one to two revolutions of the rotor.

Safe tripped state. The conveyor line is now mechanically disconnected from the motor and electrically locked out. No chain motion can occur. Maintenance personnel can safely access the blocked zone, clear the obstruction, and verify free chain movement along the entire affected track segment.

 

Suitable Operating Environment

The QXG250 drive unit is engineered for continuous-duty operation in industrial finishing-line environments. The following environmental envelope defines the conditions under which the unit will deliver its rated performance and service life:

Environmental Factor

QXG250 Drive Unit Specification

Ambient Temperature Range

–20 °C to +200 °C (drive head frame; motor rated to +40 °C ambient; install motor outside oven zone)

Relative Humidity

10%–95%, non-condensing

Dust / Particulate Exposure

Compatible with moderate powder-coating overspray; periodic compressed-air cleaning of clutch face-gear teeth recommended every 500 operating hours in high-dust environments

Chemical Exposure

Resistant to dry and cured powder-coat particulate; avoid direct spray of liquid paint, solvent, or acid onto motor and reducer housings

Vibration Environment

Drive unit frame anchored to rigid floor or overhead steel structure; anchor bolts pre-loaded to 50–60 N·m torque

Mounting Orientation

Horizontal base-plate mounting (standard); 5–10° incline acceptable with oil-level verification for worm-gear reducer lubrication

Electrical Supply

AC 380V / 50 Hz, 3-phase (standard); 220V / 60 Hz and 440V / 60 Hz available on request with motor re-specification

Duty Cycle

S1 continuous duty at rated load; intermittent reversing not recommended with standard face-gear clutch configuration

Motor & Drive Configuration Selection Guide

The QXG250 drive unit's motor, reducer, and caterpillar-drive chain are configurable components whose specifications must be matched to the conveyor circuit's total chain length, cumulative suspended load, number of horizontal and vertical curves, and desired line speed. The following selection framework guides the specification process:

Step 1: Calculate Total Chain Traction Force

The total traction force (F_total) required from the drive unit is the sum of: (a) friction force from all horizontal and vertical guide wheels rolling on the track; (b) curve resistance at each horizontal and vertical turn; (c) gravity component on incline sections if the track includes ramps; and (d) acceleration force during start-up. For typical QXG250 painting and powder-coating lines with 100–300 m loop length and 15–25 kg per-hanger workpieces, total traction force typically falls in the 2.5–4.0 kN range.

Step 2: Select Motor Power Rating

Motor power (kW) is calculated as: P = (F_total × v) / (60 × η), where v is line speed in m/min and η is the combined efficiency of reducer plus caterpillar drive mechanism (typically 0.70–0.80). For QXG250 applications, three motor power tiers are commonly specified:

Motor Power

Typical Chain Speed Range

Recommended Application

1.5 kW

0.5–3 m/min

Short lines (≤80 m loop); light hanger loads (≤15 kg); electroplating or inspection conveyors

2.2 kW (standard)

1–6 m/min

Medium lines (80–150 m loop); typical painting/powder-coating loads (15–25 kg per hanger); two-shift operation

3.0–4.0 kW

3–12 m/min

Long lines (150–300 m loop); higher throughput (25–50 kg per hanger); three-shift continuous production

Note: The electromagnetic speed-regulating motor allows stepless speed adjustment within a 1:10 range (e.g. 120–1200 RPM at the motor shaft), providing the operational flexibility to tune line speed for different workpiece sizes, coating thicknesses, or drying requirements without changing mechanical reduction ratios.

Step 3: Select Reducer Type & Ratio

The reducer steps down motor RPM to the drive sprocket's design speed while multiplying torque. Two reducer architectures are available for the QXG250 drive unit:

Reducer Type

Characteristics

Worm-gear reducer (standard)

Single-stage reduction; ratios from 10:1 to 60:1; inherently self-locking (prevents back-driving when motor is off); compact footprint; ~75%–85% efficiency per stage; requires periodic oil-level check. Best for lines where the chain must not drift when powered down.

Helical-gear reducer (optional)

Two or three-stage reduction; ratios from 20:1 to 200:1; higher efficiency (~90%–95%); non-self-locking (requires motor brake for hold); longer service intervals. Best for energy-conscious high-speed lines where the motor will provide braking.

 

Technical Specifications

 

The QXG250 spring safety clutch drive unit is dimensioned for the 250 mm pitch enclosed-track overhead conveyor chain running in the standard 80 × 80 mm QXG square-section enclosed rail profile.

Parameter

QXG250 Safety Clutch Drive Unit

Compatible Chain Type

QXG250 enclosed-track overhead conveyor chain (250 mm pitch)

Compatible Track Profile

80 × 80 mm square-section enclosed rail (QXG standard)

Drive Architecture

Caterpillar drive: motor → reducer → safety clutch → drive sprocket → caterpillar drive chain with pusher dogs

Motor Type

Electromagnetic speed-regulating (slip-clutch) AC induction motor

Motor Power (standard)

2.2 kW (1.5 kW and 3.0–4.0 kW also available)

Motor Speed Regulation

Stepless, 1:10 range (typically 120–1200 RPM at motor shaft)

Electrical Supply

AC 380V ± 10% / 50 Hz, 3-phase

Reducer Type (standard)

Single-stage worm-gear reducer

Reducer Ratio (typical)

20:1 to 40:1 (matched to desired line speed and motor speed range)

Reducer Efficiency

75%–85% (worm-gear); 90%–95% (helical-gear option)

Safety Clutch Type

Spring-loaded face-gear (dog/jaw clutch) with adjustable pre-load

Clutch Trip Setting (factory)

~100% of chain allowable tensile force (typically 4.0–5.0 kN for QXG250)

Clutch Trip Response Time

<10 ms from overload detection to full disengagement

Clutch Reset Method

Automatic: returns to engagement when drive head frame pivots back; no manual re-clutching required

Limit Switch Type

Mechanical roller-lever limit switch; normally-closed contact wired in series with motor contactor coil

Drive Sprocket Tooth Count

8T (standard); 10T (optional for lower chain speed at same motor RPM)

Caterpillar Drive Chain Type

Hardened pusher-dog chain matched to 250 mm conveyor chain pitch

Drive Head Frame Pivot Angle (trip)

10–15° counterclockwise

Line Speed Range (typical)

0.5–15 m/min (actual range depends on motor speed, reducer ratio, and sprocket tooth count)

Frame / Housing Material

Welded Q235 structural steel plate with machined bearing seats

Drive Sprocket Material

45# carbon steel, induction-hardened tooth profile (HRC 48–52 at tooth flank)

Caterpillar Pusher Dog Material

40Cr alloy steel, quenched and tempered (HRC 42–46)

Surface Treatment

Epoxy electrophoretic coating (e-coating), black; motor housing: OEM paint finish

Mounting Footprint (approx.)

800 × 500 mm (base plate); M16 anchor bolts, 4-point mounting

Unit Weight (approx., incl. motor)

120–180 kg (varies with motor and reducer selection)

Bearing Lubrication

Drive sprocket bearings: grease-lubricated (Zerk fittings); reducer: oil-bath splash-lubricated (ISO VG 220 gear oil)

Operating Temperature (frame)

–20 °C to +200 °C; motor ambient limit +40 °C

Protection Features

Mechanical overload clutch + limit-switch motor cut-out + emergency-stop circuit interface

Certification Compliance

CE; designed per ISO 9001 quality management; electrical per IEC 60204-1 machine safety

Note: The drive unit is shipped as a pre-assembled module including the motor, reducer, safety clutch mechanism, drive sprocket, caterpillar drive chain segment, limit switch, base plate, and M16 anchor bolts. The QXG250 conveyor chain is ordered separately by the metre. Drive unit must be installed on a rigid floor or overhead steel platform capable of supporting the unit weight plus dynamic reaction forces during normal operation and overload trip events.

 

FAQ

Q: 1:What motor power rating do I need for my specific conveyor circuit?

A:Motor selection depends on total chain loop length, cumulative suspended load, and desired operating speed. As a guideline: lines up to 80 m with light loads (≤15 kg/hanger) are adequately served by 1.5 kW; lines of 80–150 m with typical painting loads (15–25 kg/hanger) use the 2.2 kW standard unit; lines exceeding 150 m or carrying 25–50 kg per hanger at speeds above 6 m/min should be specified with the 3.0–4.0 kW motor option. Provide your conveyor layout diagram, hanger load, and target line speed to our engineering team for a verified motor sizing calculation - we return a traction-force analysis within 48 hours.

Q: 2:How do I prevent nuisance clutch trips during motor start-up?

A: Motor start-up torque can briefly exceed the steady-state running torque, particularly in worm-gear drives where static friction ('stiction') in the reducer is higher than running friction. If the clutch trips during every cold start but holds during normal running, increase the spring pre-load by 10–15% (one-half to one full turn of the adjustment collar) to provide a modest start-up margin. Do not increase pre-load beyond 130% of the chain's rated tensile force, as this would compromise the clutch's ability to disengage before chain-link damage occurs. If start-up trips persist after a 15% adjustment, investigate whether the reducer or track requires lubrication, or whether a seized wheel bearing is increasing static breakaway torque.

Q: 3. Is the QXG250 drive unit compatible with my existing QXG200 or QXG300 chain?

A:  No. The QXG250 drive unit's caterpillar pusher dogs are spaced to engage 250 mm pitch cruciform joint blocks. A QXG200 chain (200 mm pitch) would result in every second or third pusher dog missing its engagement window, producing intermittent drive pulsation and accelerated dog-tip wear. A QXG300 chain (300 mm pitch) would experience the reverse problem - multiple dogs attempting to engage the same joint block simultaneously, causing interference and potential chain damage. Separate drive units with pitch-matched pusher-dog spacing are available for QXG150, QXG200, QXG206, QXG240, and QXG300 chain families. Always specify the chain model when ordering the drive unit to ensure correct pusher-dog indexing.

Q: 4: Does the spring clutch require periodic maintenance or replacement?

A: The spring clutch is designed for a service life of 10 000+ trip cycles under normal operating conditions. Routine maintenance consists of: (a) visual inspection of the face-gear teeth for chipping or brinelling at each 500-hour service interval; (b) cleaning of the clutch housing interior with compressed air every 1 000 hours in dusty environments to prevent particulate build-up that could impede face-gear engagement; (c) verification of spring compressed-length measurement against the baseline documented in the maintenance log every 2 000 hours to detect spring relaxation. If the compressed length has increased by more than 5% from baseline (indicating spring fatigue), replace the spring assembly. Replacement springs are stocked.

-42008

Hot Tags: qxg250 spring safety clutch drive unit, China qxg250 spring safety clutch drive unit manufacturers, suppliers, factory, 5T Caterpillar Drive Unit, dc drive unit, drive unit, Five Tons Series Drive Unit, modular drive unit, quality drive unit

Send Inquiry

whatsapp

Phone

E-mail

Inquiry